Description:
- high performance, small dimensions and low weight - an ideal instrument suitable for all types of engine
- set the limit values at two levels (Warning and Alarm) for all measured quantities; in case of exceeding these values, the instrument will warn you in time of possible engine damage
- using the configuration program delivered with the instrument, configure the display according to your requirements to show temperature, pressure, rotation speed, battery voltage, engine hours, OAT, fuel consumption
Basic functions:
- display immediately the maximum values reached, by pressing the external button
- using your PC, download at any time the history of the measured values from the Combined Engine Instrument
- connect your Combined Engine Instrument to the output of the signalisation unit, which will warn you of the exceeded limits
- connect your Combined Engine Instrument with the Intercom using the iFamily® Bus and gain the option of having a voice alert of the exceeded limits
- you can at any time download the latest version of the firmware to your instrument, thereby always having the latest functions we prepare for you
Other functions:
- designed for all types of engine
- incorporates the "real time and date" circuit for the reverse analysis of the measured values and detecting the person guilty of exceeding some of the set limits
- measures EGT and CHT temperatures using the thermocouple sensors of the type K and J
- measures the temperature of oil and water
- measures the oil pressure using the resistive sensor or the sensor with the voltage output
- measures the instant fuel consumption
- high-precision measurement
- history of the measured values with use of the SchecK® method
Technical parameters:
- voltage: 10.0 to 32.0 Volts
- backlights internal or external: 5V, 12V or 24V
- current consumption: 200 to 250 mA @ 14 Volts
- maximal voltage and signal current: 30 Volts, 1 Ampere
- measurement: +/-1%(not including sensor accuracy)
- resolution: 1°C (1.8°F), 0.1 bar (1.45PSI), 0.1 Liter/hour (0.26US-Gallon), 0.1 Volts, RPM 1 digit
- operating: -20°C to 70°C (-4°F to 158°F) temperature range
- relative humidity: 95% without condensation
- load: +/-20 g
- vibration: 1 to 200 Hz
- weight: 450 grams (0,99 lbs)
- dimensions: 85x85x65 mm (3.346x3.346x2.559 inch)
- diameter hole: 80 mm (3 1/8")
- EGT input for thermocouple probe: -40 °C to 1100 °C by environmental temperature 25 °C
- CHT input for thermocouple probe: -20 °C to 800 °C by environmental temperature 25 °C
- input for pressure sensor: active 0 to 5 Volts / passive 0 to 500 ohms
- input for temperature sensors: PT-100 or VDO silver line with black isolator
- input for flow sensor: HIGH level detected
- communication line with a PC via standard RS-232c
Accessories:
3724-01 Thermocouple probe for Exhaust temperature EGT (type K) M8x1 Screw Type
3724-16 Thermocouple probe for Exhaust temperature EGT (type K) M8x1 Screw Type (Advanced)
3724-19 Thermocouple probe for Exhaust temperature EGT (type K) Clamp Type, diameter max. 60mm
3724-02H2 Thermocouple probe for Cylinder head CHT (type J) 12mm Ring Terminal
3724-02H4 Thermocouple probe for Cylinder head CHT (type J) 14mm Ring Terminal
3724-02H8 Thermocouple probe for Cylinder head CHT (type J) 18mm Ring Terminal
3724-03 Oil or Water temperature probe (0 to 110 °C / 0 to 230°F)
3724-04 Oil or Water temperature probe (0 to 150 °C / 0 to 300°F)
3724-14 Oil or Water temperature probe (0 to 150 °C / 0 to 300°F) - for Jabiru engine
3724-15 Oil or Water temperature probe (-20 to 240 °C / -4 to 460°F)
3724-13 Passive Oil pressure sensor (0 to 5 bar / 0 to 72 PSI, 1/8-27 NPT) - for Jabiru engine
3724-05 Passive Oil pressure sensor (0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
3724-06 Active Oil or Fuel pressure sensor (Honeywell P/N:MLH010BGB06E - 0 to 10 bar / 0 to 145 PSI, 1/8-27 NPT)
3724-07 Metal high-quality flow sensor (Floscan P/N:201A-6 - 1 to 113 litres/hour / 0.3 to 30 GPH)
3724-17 Metal high-quality flow sensor (Floscan P/N:201B-6 - 2 to 227 litres/hour / 0.6 to 60 GPH)
3724-18 Metal high-quality flow sensor (Floscan P/N:201C-6 - 7 to 302 litres/hour / 2 to 80 GPH)
3724-08 Passive speed sensor (inductive sensor)
3724-09 Active speed sensor (inductive sensor)
3724-10 Active speed sensor for engines with Bendix magneto (Westach P/N:720-14RB)
3724-11 Active speed sensor for engines with Slick magneto (Westach P/N:720-14R)
3724-12 Active speed sensor for engines with mechanical tach drive (Westach P/N:303DH2T)
Other Accessories:
0024-18 Extending thermocouple cable for Exhaust temperature probe EGT - 0.1 metre / 3.93inch
0024-01 Extending thermocouple cable for Exhaust temperature probe EGT - 1 metre / 39.3inch
0024-02 Extending thermocouple cable for Exhaust temperature probe EGT - 2 metres / 78.7inch
0024-10 Extending thermocouple cable for Exhaust temperature probe EGT - 3 metre / 118.1inch
0024-19 Extending thermocouple cable for Cylinder head temperature probe CHT - 0.1 metre / 3.93inch
0024-03 Extending thermocouple cable for Cylinder head temperature probe CHT - 1 metre / 39.3inch
0024-04 Extending thermocouple cable for Cylinder head temperature probe CHT - 2 metres / 78.7inch
0024-11 Extending thermocouple cable for Cylinder head temperature probe CHT - 3 metre / 118.1inch
0024-20 Stainless steel nut with metric winding M8x1 for EGT probe
0024-56 Copper washer for Exhaust temperature probe
0024-59 T-Fitting for fuel pressure sensor
0024-62 Fitting for fuel flow sensor
0024-06 Canon connector D-SUB 9 pins for connecting PC to instrument
0024-07 Extension cable between PC and Canon connector D-SUB 1,8 metres / 70.8inch
0024-08 USB to serial RS-232 converter, 1,8 metres / 70.8inch
0024-15 Signalization Light (LED) incl. chromium-plated holder
0024-16 Button to the instrument panel
